Characteristic:
- The innovative device, which is the Electromig 250 semi-automatic welding machine, can be powered by single-phase or two-phase power, depending on the requirements. The product is manufactured in accordance with modern IGBT inverter technology. This, in turn, allows welding using various methods, which is undoubtedly a big advantage. Welding methods it supportsElectromig 250 semi-automatic welding machine, are as follows: welding with coated electrodes with direct current (DC), FLUX welding, which is characterized by the lack of gas shielding, and MIG/MAG welding, which in turn takes place in gas shielding. The device was designed to operate with self-shielding wires with a diameter of 0.9 mm, welding wires 0.6-1.0 mm and with coated electrodes that have a diameter no larger than 4 mm.Electromig 250 semi-automatic welding machinewill be used when welding iron castings, alloy steel (MIG), aluminum and low-carbon steel.
- It is worth adding that this product is able to handle a spool of up to 15 kg D300. What else makes it stand out is the ability to adjust the wire feed and welding current, which is done via electronic control. What's more,Electromig 250 semi-automatic welding machineIt is equipped with a digital display and special signaling diodes that indicate when an overload occurs (red diode). Additional advantages of the device are: a mass cable, an MMA welding cable, and a Euro connector. The semi-automatic machine also has thermal protection and a fast wire feed button.Electromig 250 semi-automatic welding machineit will be perfect for activities carried out both in industry and in the workshop.
Technical data:
Supply voltage [V] | 230/400 |
No-load current voltage [V] | 56 |
Welding current adjustment range [A] | MIG – 30-230 MMA 30-230 |
Maximum efficiency at 40°C EN 60974-1 |
200A@60% 130A@100% |
Wire diameter [mm] | 0,6-1,0 |
Max spool weight [kg] | 15 |
Protection class [IP] | 21S |
Dimensions [cm] | 72x38x42 |
Opinions
There are no opinions about the product yet.