Technical parameters
TECNOMIG 285 PULSE SYNERGICis an inverter synergic semi-automatic welding machine designed for arc welding using the MIG/MAG and MMA methods and brazing of galvanized sheets. The device has been designed for professional and industrial use.
The device has three MIG/MAG welding modes: MANUAL MIG, PULSED MIG, DOUBLE PULSE MIG.
TECNOMIG 285 PULSE SYNERGICit is used for welding aluminum and its alloys, stainless steel, carbon and low-alloy steels, and brazing of galvanized sheets. Welding takes place in the shield of inert gas, active gas or a mixture, depending on the program selected on the control panel.
Thanks to the applicationMIG pulsationthe amount of heat introduced into the welded element increases. It is possible to obtain a better weld, regardless of the welding position, and reduce the amount of spatter.
In both the MIG and MIG PULS methods, we can choose the function of the button in the handle between working in modeSPOT(spot welding),2-step, S4-step(dedicated to aluminum welding),4-stroke(button lock for long welds),
Readable and easy to usedigital control panelallows precise adjustment of welding parameters such as:
– gas flow time adjustment before welding
– regulation of welding current / base current in double pulse
– inductance adjustment
– regulation of the starting current inS4-step
-double pulse peak current regulation
– double pulse balance adjustment
– regulation of the pulsation frequency in double pulse
– spot welding time adjustment
– regulation of the wire burn-off time and voltage after welding
– regulation of gas flow time after welding
physical parameters
The device hasfan cooling systemwhich significantly increases its efficiency.
The device is equipped withoverload protection, which increases its reliability.
Power parameters
Three-phase power supply 3x400V
The device is equipped with a power plug.
Equipment
The delivery includes a device with a 3-meter-long professional MIG 25 welding torch armed with aluminum, a 3-meter-long electrode cable, a 3-meter-long mass cable, feeder rollers 1.0-1.2 for aluminum and 0.8-1, 0 to steel.
PHYSICAL PARAMETERS | |
Wire spool size | 15 kg |
Level of security | IP 21S |
Weight of the device/set | 46 / 48 kg |
Overall dimensions: length x width x height | 900x320x720 mm |
TECHNICAL PARAMETERS | |
Power | 10.2 kW |
Idle voltage | 75V |
Maximum current | 280 A |
Current at 100% operation | 220 A |
Operating Current 60% | 280 A |
Aluminum wire diameter | 0.8 – 1.2 mm |
Brazing wire diameter | 0.8 mm |
Self-shielding wire diameter | 0.8 – 1.2 mm |
Steel wire diameter | 0.8 – 1.2 mm |
Diameter of stainless steel wire | 0.8 – 1.2 mm |
Welding electrode diameter | 1.6 – 4.0 mm |
Welding current adjustment range | 10 – 280 A |
POWER PARAMETERS | |
Power supply network protection | C20A |
Rated supply voltage | 3×400V; 50Hz (3ph) |